Two updates to our 190gsm instant dry photo paper range are worth knowing about, whether you run a busy print shop, manage display production, or need consistent, high-volume output for exhibition work.

The paper is now available in 60m rolls across both the satin and gloss finishes, and both are now FSC Mixed Certified. For anyone going through paper quickly or looking to reduce change-over time on the printer, the 60m roll length is a meaningful practical improvement. For those whose clients increasingly ask about material sourcing, the FSC certification gives you something concrete to point to.

Why 60m rolls make a difference for high-output operations

A standard 30m roll on a busy wide-format printer can run out mid-job or require a roll change at an inconvenient point in a print run. The 60m roll reduces how often that happens, keeping the printer running for longer between interruptions.

For print shops, copy shops, display printers, and art galleries producing high volumes of posters, exhibition panels, or point of sale graphics, the difference between 30m and 60m adds up over a week's output. Fewer roll changes means less downtime and less time handling materials, which is particularly useful when deadlines are tight.

The 60m rolls are on a 3" core, so it is worth checking that your printer can accommodate the roll diameter before ordering. The roll diameter on a full 60m roll is 135mm.

Satin or gloss: which finish suits your output

Both finishes use a microporous instant-dry coating on a high-opacity PE-coated base, giving bright white output with high colour density and sharp image definition. The choice between them comes down to the application and the viewing conditions.

Satin gives a low-sheen finish that reduces glare without losing colour vibrancy. It is often preferred for exhibition graphics, art reproductions, and any display that will be viewed at close range or in bright lighting conditions. The satin finish also tends to show fingerprints less readily, which is useful for pieces that are handled or displayed without glazing.

Gloss gives a higher-sheen finish with strong colour contrast and saturation. It suits photographic prints, retail point of sale, and vivid poster work where maximum impact is the priority. In controlled lighting conditions, gloss can produce more striking results; in brighter or more varied ambient light, the glare can be a consideration.

For short-term outdoor use, both finishes can be used when laminated. Cold or warm lamination is recommended for the best results, rather than hot lamination, which is not compatible with this paper.

Compatible with Canon, HP and Epson wide-format printers

Both papers work with dye and pigment inks across the main wide-format printer brands, including Canon, HP and Epson. For best results, using the appropriate colour profile for your specific printer and ink combination is recommended. Canon media profiles include optimised ink and printer settings for Canon-supported printers and are available through the Canon media guide.

The paper should be allowed to adapt to room conditions for 24 hours before printing, and the printable side is the outer side of the roll. Best print results are at 23 degrees Celsius and 50 percent relative humidity; higher humidity will extend drying time.

FSC Mixed Certification

Both the satin and gloss versions of this paper now carry FSC Mixed Certification (FSC C008945), confirming that the paper is produced from a mix of materials from FSC-certified forests, recycled material, or controlled wood sources.

For print businesses working with clients in sectors where environmental credentials matter, such as retail, exhibition, or corporate communications, having an FSC-certified paper option at this weight and quality level is a straightforward way to meet those requirements without compromising on output quality.

Available widths

The 60m rolls are available in three widths: 610mm (24"), 914mm (36"), and 1067mm (42"). All 60m rolls are on a 3" core.

Where to order

The 190gsm instant dry photo paper is available in satin and gloss finishes in the Prizma Graphics online store. Orders received before 3pm are dispatched the same day, with next day delivery available.

If you have any questions about which option is right for your printer or your application, the Prizma Graphics team is available on 01296 393700.