Canon IJM614 Polymeric White Gloss Vinyl Permanent Adhesive 80 micron 1067mm x 50m 97004327
Allow material to adapt to room conditions for 24 hours before printing. It is recommended to handle the media with cotton gloves.
Make sure that the media comes not into contact with grease, oil, silicon, and dirt to avoid printing defects.
Load the media with care in the printers. Incorrect loading can cause skewing or creasing. Use a takeup device to prevent wrinkling.
It is recommended to calibrate the printer before printing and to make a test print. Print results will vary for different printer/ink combinations.
Canon media profiles include recommended settings for ink restrictions and printer parameters.
Depending on fluctuations in environment, printer, ink, media and applications, printer parameters may have to be adjusted slightly, in
order to obtain the best results.
For high-speed production printing, using an external drying unit is recommended.
Optimal bonding properties are obtained on smooth and flat, dirt-and grease-free surfaces
Fresh lacquered surfaces should not be used for the application of the vinyl foil. The vinyl can be applied to a large number of suitable
flat and smooth surfaces (dirt-and grease-free). Pretesting
the adhesive onto unknown surfaces is strongly advised.
When applying, temperature should be higher than 10°C. Service temperature range: -40°C to +90°C.
IJM614 is suitable to apply to wet surfaces. ,Temporary whitening may appear but will disappear after a short period once the adhesive
has completely dried.
For removal we recommend to start with one corner and slowly peel off the surface with a 60° – 90° peel angle. It may be helpful to use a hot-air blower or metal scraper but this must be used with caution to avoid surface damage. In the
unlikely event that some adhesive residues remain on the surface they can easily be removed with a lemon-based cleaner or solvent (e.g. heptanes, isopropylicalcohol, acetone).
Let the prints dry for at least 48 hours before laminating. Only pressure sensitive laminates are
recommended for outdoor usage.
Lamination will improve the UV resistance of the print and protects it against abrasion.
|Ink Compatibility||Solvent, Eco-solvent, Latex and UV curable|
|Media Thickness||80 micron|
|Media Type||Gloss White S/A Vinyl|
Prizma Graphics offers a nationwide delivery service. Orders received by 3pm will be shipped the same day.
We hold huge stocks and we aim to deliver all out of stock items within 3 - 5 days
We deliver to the following towns by our own van and all other areas are sent out by national courier service.
|Aylesbury||Chesham||High Wycombe||Princes Risborough||Wembley|
|Abingdon||Didcot||Hitchin||Reading||Welwyn Garden City|
|Camberley||Hemel Hempstead||Potters Bar||West London|
UK Mainland Standard Delivery 1 - 2 days £6.95
Next Day (Delivery Hours 9.00 - 17.00) £9.95 - Cut Off Time for Next Day Delivery is 3pm.
Next Day AM (Delivery Hours 9.00 - 12.00) £14.95 - Cut Off Time for Next Day AM is 3pm.
Saturday Delivery £30.00 - Cut Off Time is 3pm Friday,
Same Day Delivery is available - Please call our sales team on 01296 393700 To discuss your requirements.
Collection by Arrangement FREE
UK Channel Islands Standard Delivery (up to 15kg) £20.25
UK Isle of Man Standard Delivery (up to 15kg) £20.25
UK Isle of Wight Standard Delivery (up to 15kg) £15.75
UK Northern Ireland Standard Delivery (up to 15kg) £20.25
Ireland Standard Delivery (up to 15kg) £40.70
UK Scilly Isles Standard Delivery (up to 15kg) £20.25
UK Scottish Highlands Standard Delivery (up to 15kg) £15.75
UK Scottish Islands Standard Delivery (up to 10kg) £20.25
If your order is over the weight shown, we will contact you with any additional costs.
Standard delivery to these locations are normally 2 – 3 days.
Scottish Highlands Covers: AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV6363, KW1-14, PA21-40, PH19-26, PH30-41 & PH49-50.
Scottish Islands Covers: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44 & ZE1-3.
All prices exclude VAT.
Collection by Arrangement
We will contact you once the order has been placed with a convenient time to collect from our warehouse in Aylesbury, Bucks.
Orders outside UK
We are happy to accept orders for delivery outside the UK. However a additional delivery will be charged . Please call us on 01296 393700 and we will be happy to provide a quote for you.
Next day cut off times
Orders that require delivery next day or next day am need to be placed before these cut off times.
Monday, Cut off for next day delivery 2.30pm
Tuesday, Cut off for next day delivery 2.30pm
Wednesday, Cut off for next day delivery 2.30pm
Thursday, Cut off for next day delivery 2.30pm
Friday, Cut off for next day delivery 2.30pm (next working day which is Monday)
Not sure what product is right for you? We are here to help so call us 01296 393700 and our knowledgeable, friendly sales team can help you select the
right product for your application and budget.