210 micron Thickness

Suitable with Dye, Pigment and Vivera inks

Order online to take advantage of this very Special Offer:

914mm 36″ x 30m Roll  £85.00 + VAT

To Order click below:

http://www.prizmagraphics.co.uk/supplies/large-format-paper/CJGBB914/details

1067mm 42″ x 30m Roll £95.00 + VAT

To Order click below:

http://www.prizmagraphics.co.uk/supplies/large-format-paper/CJGBB1067/details

For information please cal our sales team on 01296 393700

• Speed: Prints 50% faster than its predecessor
• Energy Efficiency: Sleep mode to print in hand in only 40 seconds
• Quality: Grey tone potimisation boosts the print quality
• Flexibility: print from mobile devices via a WiFi router
• Reliability: new features enchance a great product.

Print up to 6 A1 plots per minute without long delays.

For further information on this mobile,fast and reliable large format printing system please contact our sales team on 01296 393700 or email sales@prizmagraphics.co.uk

Handling and Printing Guide

General storage and Handling

Keep the paper in its original packaging, sealed and in darkness until required. handle the paper with care to avoid damaging the coated surface. Avoid touching the coated side, as oils from the skin could be absorbed into the coating, which could have an adverse effect on the printb quality. Use cotton gloves if necessary. handle the paper by the edges or underside. Do not expose the paper to extremes of temperature or humity – ranges such as 15-25° and 40-50% humidity are recommended. Ensure printing is applied to the coated side.

Printing Inks and Fade resistance

For print longevity pigment-based inks are advised. This type of ink usually has far greater fade resistance than the equivalent dye-based ink, making it ideal for coated inkjet papers. As with an original artwork, prints should be framed behind glass and hung away from direct sunlight.

Care after Printing

Coated inkjet papers can react to solvents, plasticisers or antioxidants, by producing a transient yellow cast. To avoid this, let the prints dry thoroughly. This is best done individually in drying racks, which allow free circulation of air. Do not stack a number of freshly printed prints in a pile. Do not seal freshly printed material in polythene bags, in drawers, or other areas where air cannot freely circulate until the print is dry. If the dried prints are to be stored in plastic bags at any point, avoid the use of bags that contain plasticers. Certain materials such as tapes and dry mounting film contain plasticisers, and can cause discolouration, which is a known but only temporary phenomenon, and can be reversed by exposure to UV light. If yellowing is exprienced, exposing to daylight for a short period can permanently reverse it. A purpose made protective spray may be used as a fixative.

For further inforamtion and to view our full range of digital fine art papers link below:

http://www.prizmagraphics.co.uk/supplies/fine-art-inkjet-media

Help and Advice

Choosing the right CAD plotter paper for your Inkjet Plotter

There are many varieties of inkjet paper on the market for today`s plotters. Most plotter papers are universal and suitable for HP designjet, Canon IPF, Oce CS, Epson and Xerox machines. When choosing it is important to consider, paper quality to suit your application, weight, roll length and width, we hope this guide will help uncover this very confusing range of large format papers.

Paper Weights/Media types.

60gsm – Semi-transparent uncoated paper suitable for check plots, originally produced to take dyeline copies. Good for mono and line colour plots and where cost reductions  of posting is important.

80gsm – Opaque uncoated paper suitable for mono and line colour. Low cost paper which is used by construction and production markets.

90gsm – Opaque uncoated paper suitable for mono and line colour. The market standard paper, used by all types of businesses, durable and available in all sizes for most machines on the market.

90gsm/100gsm/120gsm Opaque Coated paper, A smooth media, with good colour gamut and brighter colour prints. Used by GIS departments,Graphic designers and architects producing presentations.

Roll Lengths

Older machines like the HP Designjet 200, 400, 600, 700 series will take upto 50 meter rolls for 80/90gsm uncoated paper. 90 meter rolls are available for plotters such as the HP 1050 & HP1055 series, HP4000, HP4500 and the later models T1100, Z series and also Canon IPF and Oce CS range.  Longer rolls are available for some Canon and Oce machines upto 120 meters but its always best to check. The best value for money are the longer rolls, so always better to choose if your machine will take them.

Roll Widths

A1 Rolls – Standard width is 24″  610mm This is bigger than standard DIN A1 size but cover across thje world markets. Available but not in every weight is 594mm width for exact A1 plotting thus no need to trim prints.

A0 Rolls – Over sized roll as standard is 36″ 914mm which allows for margins. A more popular size is the 841mm width which will enable printing to A0 DIN size with no trimming.

Core Sizes

The standard core size for CAD inkjet plotters is 2″ 50mm but there are some few exceptions,  newer machines will provide 3” adapters and some graphic printers will take 3″ 75mm media. If you are unsure its always best to check.

2 Roll large Format Colour Scan, Copy, Print System.

Special Offer Price from £6,275.00 + VAT. Plus trade-in your old plotter, worth up to £739.00 off the price!

New HP Designjet T2300 Postscript eMFP Multifunction Wide-Format A0 Printer, A0 Copier and A0 Scanner (CN728A) is designed for medium and large architecture, engineering and construction firms and enterprise businesses, the HP Designjet T2300 eMFP allows design professionals to easily scan and upload documents to the web and to print drawings wherever needed – from project team meetings at the main office to reviews with clients and even at the construction site.

With two online media rolls and simultaneous copy and scan functions, the HP Designjet T2300 eMFP is designed to improve productivity at each of these locations by accommodating multiple projects at the same time.

For further information click below:

http://www.prizmagraphics.co.uk/equipment/scan-copy-print-systems/hp-designjet-t2300e-mfp/details

Matt White S/A Vinyl with permanent adhesive is on special offer. Print on all large format inkjet printers using dye & pigment inks. Great colour density, vibrant and good ink coverage. Water resistant with pigment inks and can be extended with over lamination for outdoor use.

Applications: Exhibitions, displays and point of sale.

Rolls widths available: 914mm, 1067mm, 1270mm, 1524mm All in 20m lenghts.

For further information and to buy online, click on this link below:

http://www.prizmagraphics.co.uk/supplies/large-format-paper/self-adhesive-vinyl-banner

1, Click file login > key Operator (password is KeyOp)

2, Click “jobs”

3, Click the “Copy & File tab.

4, Expand the “file card folder > “Destination”>”File format” (SelectPDF)

5, Click “Apply”

If you need further assistance with your Oce TDS320 Printer please contact our support team on 01296 393700

We can give help and advice over the telephone and have trained engineers to service and repair your machine.

New machines are no longer available from Diazit in the US as they have stopped production, so we can offer a range of refurbished PPC plan copiers to replace any machines we are unable to fix.

Please send us your details or a picture!

PLUS AN EXTRA 5% OFF WHEN YOU ORDER ONLINE

Click on the model for more information:

Canon Image PROGRAF iPF605

Canon Image PROGRAF iPF750

Canon Image PROGRAF iPF755

Canon Image PROGRAF iPF815

Canon Image PROGRAF iPF825

Canon Image PROGRAF iPF6300

Canon Image PROGRAF iPF6350

Canon Image PROGRAF iPF6300S

Canon Image PROGRAF iPF8300

Canon Image PROGRAF iPF8300S

Canon Image PROGRAF iPF8000S

Canon Image PROGRAF iPF9000S

Canon Image PROGRAF iPF9100

For further information please contact our sales team on 01296 393700